Product General and Technical Information
Date: 12/10/2014
Name: Polyethylene Foam Roll
General Information
Polyethylene Foam Roll is a good-quality foam with a medium feel. Common applications can be found Here.

Property
(ASTM D 3575)
2.0 LB 4.0 LB
Density (LB/Cubic Ft.) 2.0 4.0
Compression Strength (PSI): 25% / 50% 5 / 14 9 / 19
Tensile (PSI) 60 123
Elongation (%) Min. 124 127
Tear (LB/Inch) 11 24
Compresion Set (%) 28 18
Shore Hardness: A Scale / OO Scale 7 / 51 15 / 64
Thermal Stability (%) Max.
3 Hours @ 180°F
-1.0 -0.7
Thermal Conductivity @ 50°F
(BTU·in/hr·Sq.Ft·°F
0.33 0.27
Water Absorption (LB/Sq.Ft.) 0.04 0.04
Buoyancy (PCF) Min. 55.0 -
Contains Fire Retardant Additives No No

All values reported are typical values. We cannot guarantee the applicability or the accuracy of this information or the suitability of the product for any particular purpose. This product is sold without warranty, expressed or implied. (Unless stated otherwise.) Buyer assumes all responsibility for loss or damage arising from the handling and use of this product, whether done in accordance with directions or not. Statements concerning the possible use of this product are not intended as recommendation to use this product in the infringement of any patent.

Copyright © 1997-2024 The Foam Factory. All rights reserved.