Product General and Technical Information
Date: 12/24/2019
Name: YoungBoard Conductive XLPE
General Information
YoungBoard Conductive XLPE is a good-quality foam with a firm feel. The most common application is packaging of electronic components.

Property Test Method Values
Density (LB/Cubic Ft.) ASTM D 3575 3
Tensile Strength (LB/In. Sq.) ASTM D 3575 49.7
Elongation (%) ASTM D 3575 75
Tear Strength (LB/In.) ASTM D 3575 7.3
Compression Strength
(LB/In. Sq.): 25% / 50%
ASTM D 3575 13.2 / 27.5
Compression Set (%) Original Thickness ASTM D 3575 4.5
Surface Resistivity (OHM) ASTM D 3575 1x105 ~ 1x109
Thermal Stability
24 Hour Test @ 176° F (70°C) AVE MD(%)
ASTM D 3575 ≤ -1.3
Thermal Conductivity
(btu/hr/ft2 °F)
ASTM D 3575 0.30
Fire Retardant Additives ASTM D 3575 No

All values reported are typical values. We cannot guarantee the applicability or the accuracy of this information or the suitability of the product for any particular purpose. This product is sold without warranty, expressed or implied. (Unless stated otherwise.) Buyer assumes all responsibility for loss or damage arising from the handling and use of this product, whether done in accordance with directions or not. Statements concerning the possible use of this product are not intended as recommendation to use this product in the infringement of any patent.

Copyright © 1997-2024 The Foam Factory. All rights reserved.