Rebond is a foam that is able to handle daily, heavy use. It is especially recommended for use in automobiles, snowmobiles, tractors and recreational vehicles because of its ability to withstand motor vibrations while maintaining longevity.
|Density (LB/Cubic Ft.)||ASTM D 3574||7.0|
|25% ILD (LB)||ASTM D 3574||70.0|
|Tensile (PSI) Min.||ASTM D 3574||5.0|
|Elongation (2.5" gage length) Min.||ASTM D 3574||45%|
|Compression Set||ASTM D 3574||15% Max|
|Contains Fire Retardant Additives||- - -||Trace Amounts|
All values reported are typical values. We cannot guarantee the applicability or the accuracy of this information or the suitability of the product for any particular purpose. This product is sold without warranty, expressed or implied. (Unless stated otherwise.) Buyer assumes all responsibility for loss or damage arising from the handling and use of this product, whether done in accordance with directions or not. Statements concerning the possible use of this product are not intended as recommendation to use this product in the infringement of any patent.
Copyright © 1997-2016 The Foam Factory. All rights reserved.